Ultrasonic Testing Equipment’s& Accessories- (UT)
DIGITAL ULTRASONIC FLAW DETECTOR/EKKO+/JMD/USA
High performance with adjustable spike & Spare wave pulser up to 500V and operation frequency up to 20MHz, the EKKO/EKKO+ can achieve precise flaw detection from thin plates to large forged pieces. Rich Functions the system features with outstanding functions such as auto gain control, peak memory, DAC, AVG/DGS,TCG & AWS D1.1.The configured Li-Polymer battery can support up to 7 hours Continuous operation. The whole unit weight is 1.25 Kg easy to use in field job.
Multigauge Thickness GaugeMG 5300 – TRITEX - UK
The Multigauge 5300 GRP thickness gauge is a simple, robust ultrasonic thickness gauge designed to check the condition of Glass Reinforced Plastic (GRP) or Engineering Plastics. It can also be used on uncoated metal. The easy to use keypad allows operator interface, whilst the bright colour LCD display can be used in all light conditions. The moulded soft rubber surround feels comfortable, looks good and provides extra protection against knocks and scrapes. All probes have Intelligent Probe Recognition (IPR), which automatically adjusts settings in the gauge at the same time as transmitting recognition data – the result is a perfectly matched probe and gauge for enhanced performance.
HANDS FREE THICKNES GAUGE – MG 5500 – TRITEX - UK
The Multigauge 5500 metal thickness tester has been designed for hands free use when climbing on staging, scaffolding, ladders or when accessing by rope. Whether it’s onboard a ship, on large storage tanks, climbing on top of a road tanker or carrying out inspections underneath a bridge, the 5500 will measure the thickness with ease. The gauge uses multiple echo to ignore coatings up to 6mm thick. It can be mounted onto a waist belt or chest harness when using rope access. The top display ensures the measurements are clearly visible, even in difficult gauging and lighting conditions. A protective leather case is also available.
SURVEYOR THICKNESS GAUGE DATALOGGER-MG5750-TRITEX-UK
The Multigauge 5750 Surveyor Thickness Meter is a simple, robust ultrasonic thickness gauge designed specifically for ship and small craft surveyors, but can also be used in applications where different measurment modes are required. The user has a choice of Multiple Echo, Echo to Echo or Single Echo to cover all requirements. The gauge can be used for metal, GRP or plastic measurement and it automatically switches modes and settings depending on the type of probe fitted. It has the added benefit of being able store measurements on the gauge and remotely displaying measurements on a PC. . All probes have Intelligent Probe Recognition (IPR), which automatically adjusts settings in the gauge at the same time as transmitting recognition data – the result is a perfectly matched probe and gauge for enhanced performance. Additionally, the Automatic Measurement Verification System (AMVS) used with multiple echoes ensures only true measurements are displayed, even on the most heavily corroded metals. Measurements can also be displayed remotely on a PC up to 1000 metres away.
MG 3000-TRITEX
MG4000-TRITEX
CTS 30B – SIUI
CTS 59-SIUI
Hardness Tester PCE-2000 - UK
PCE-2000 (type D impact) portable hardness tester is used for quickly testing surface hardness of metallic materials according to the parameters: Rockwell B & C, Vickers HV, Brinell HB, Shore HS and Leeb HL. The hardness tester has a statistics function, a data storage function, and the interface RS232 to send data to the PC.The hardness tester can be used in any position, including on a mount, with angle selection and adjustment. The striking unit fits easily on top of the item being measured. With the external digital indicator showing all the functions and readings, there is no way of making errors in the measurements.
HANDS FREE THICKNES GAUGE – MG 5500 – TRITEX - UK
PCE-2500 is a portable, handheld, pen-sized, digital metal hardness tester, rebound hammer or durometer. This hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze wrought copper and forging steel.
Hardness Tester PCE-1000 - UK
Hardness tester ideal for testing surface hardness of metallic surfaces quickly. Operates on 9V rechargeable battery only. Included charger and test block. Manual striker is reset by user with included roll pin. - Scales of hardness: STEEL, ALLOY STEEL, STAINLESS STEEL, GREY CASTIR, NODULAR CAST IRON, CAST ALUMINIUM, BRASS, BRONZE, COPPER.
Hardness Tester PCE-900 – UK
PCE-900 is a digital, handheld durometer or portable Leeb rebound hardness meter used to measure metal hardness. Precise and versatile, this Leeb hardness tester.
V1 BLOCK
V2 BLOCK
LEMO/BNC/MICRODOT
UT and AUT PROBES
IOW BLOCK-CS/SS/AL
UT RESOLUTION BLOCK
Phased Array Block
