slidebg1



UTM Accessories

Extensometer :

This instrument is to be used on Tensile or Universal Testing Machines to find out values of “PROOF STRESS”, “YOUNG MODULUS” & “Materials strain related properties”

Mechanical Extensometer :

Model FXT-3
Measuring range 3mm
Resolution 0.01 mm
Gauge lengths 30 - 120 mm adjustable

Electronics Extensometer :

(Clip on type)
Model TEE
Measuring range 3mm
Resolution 0.001 mm
Gauge lengths 30 - 120 mm adjustable
Standard two fixed gauge lengths of 25 & 50 mm
The measurement accuracy satisfies all requirements of “Class -1 as per IS 12872-1990
Superior Electromechanical Tensile Testing Machine Superior Electromechanical Tensile Testing Machine

Long travel extensometer:

Gauge length 600 mm Max
Resolution 0.01 mm
Superior Electromechanical Tensile Testing Machine

High Temperature HOT Chamber :

Hot Chamber assembly with UTM is supplied as an extra accessory to check tensile strength related parameters of the samples at hot condition.

Technical Specification :

Temperature Range 300° to 1200° C
Max Gauge length of sample in hot Chamber 100 mm
Main Supply 230V, AC, 50 Hz, 16 amp
Max. Current 30 amp
Sample holding dia for small samples M20, M12
Superior Electromechanical Tensile Testing Machine

Small double shear /Big Double Shear :

  • Small double shear test with 5 sets of bushes for shear test of Dia 5, 8, 12, 16 & 20 mm.
  • Big double shear test with 5 sets of bushes for shear test of Dia 25, 30, 35 & 40 mm.

Tensile test attachment for shouldered and threaded specimen :

  • Bare Attachment
  • 1 Set of 8 split bushes with springs for Dia 6, 8, 10, 12, 14, 16, 18 & 20 mm shouldered specimen (size in mm)
  • 1 Set of 6 threaded bushes for M 6, M 8, M 12, M 14, M 18 & M 20 threaded specimen
Superior Electromechanical Tensile Testing Machine Superior Electromechanical Tensile Testing Machine

180°Bend test attachment :

Hot Chamber assembly with UTM is supplied as an extra accessory to check tensile strength related parameters of the samples at hot condition.

Technical Specification :

  • Dia of bending support rollers – 30 mm
  • Width of bending support rollers – 60 mm
  • Max. distance between bending supports – 175 mm
  • Min. distance between bending supports – 15 mm
  • Dia of bending pane pin – 30 mm
  • The attachment meets the requirement of IS-1599-1976 & IS 692-1974
Superior Electromechanical Tensile Testing Machine

Bend Rebend :

Bend Re-bend test attachment as per BS 4449 - 1997 for Bar upto 40 mm dia bending tools of dia 16, 20,24, 32, 40, 50, 60, 64, 80, 140, 175, 240, 280 & 320 mm

Superior Electromechanical Tensile Testing Machine Superior Electromechanical Tensile Testing Machine

Nut Bolt Testing Fixture :

Nut Bolt Testing Fixture as per IS 1367 Part 3 & 6 suitable for testing of Nuts & bolts from size M 6 to M 33

Superior Electromechanical Tensile Testing Machine Superior Electromechanical Tensile Testing Machine Superior Electromechanical Tensile Testing Machine Superior Electromechanical Tensile Testing Machine

Wire Rope :

Wire rope tensile test attachment for wire rope upto 10 mm dia.

Superior Electromechanical Tensile Testing Machine

Grips for Strand wire :

Special Jaw Set & Inserts for Strand Wire suitable for Dia 6.35mm, dia 7.95mm, dia 9.5mm, dia 11.1mm, dia 12.7mm , dia 15.2mm

Superior Electromechanical Tensile Testing Machine