PRECISION
ANALYSIS FOR EVERY INDUSTRY
12 Sectors.
One Trusted Partner.
Select an industry to explore specific applications, recommended instruments, and compliance standards. Each sector is supported by Maark's local expertise across the UAE and GCC.
PMI for pipelines, corrosion monitoring, PWHT for welds, and coating integrity — upstream to downstream.
Incoming material inspection, RoHS & REACH screening, catalyst analysis, and equipment QC.
Alloy verification, scrap sorting, OES melt chemistry, and weld filler PMI from foundry to fabrication.
Boiler tube PMI, turbine alloy verification, coal ash analysis, and PWHT for energy plants.
Implant biocompatibility, medical device RoHS, and Xograph CR/DR imaging for UAE healthcare.
Soil heavy metal screening, lead paint detection, air particulates, and WEEE waste classification.
In-situ soil nutrient and heavy metal analysis, fertiliser Cd screening, and irrigation water quality.
Ti, Ni superalloy and Al alloy verification for aircraft MRO, NADCAP and AS9100 traceability.
Lead paint screening, rebar alloy verification, aggregate analysis, and structural steel PMI.
Elemental impurities in pharma materials, bioreactor PMI, and ICH Q3D packaging compliance.
Desktop XRF, OES and LIBS for universities, research institutes and analytical labs.
Non-destructive gold, silver, and platinum purity verification for traders and jewellers.
Verified
Oil & Gas
Incorrect alloy grades in high-pressure, high-temperature pipelines can lead to catastrophic failure. Our NITON XRF analyzers deliver instant non-destructive PMI on-site — confirming material grade in under 2 seconds, anywhere in the field.
Positive Material Identification (PMI)
Verify alloy grades in pipelines, valves, fittings, and pressure vessels non-destructively. Comply with API 578 and ASME on-site.
Corrosion Monitoring & Wall Thickness
Ultrasonic gauging tracks pipe wall degradation over time — without removing insulation or coatings.
Weld Inspection & PWHT
Post-weld heat treatment relieves residual stresses in tie-ins and pressure vessel fabrication. Compliant with ASME B31.3 / B31.8.
Coating Holiday Detection
Tinker & Rasor holiday detectors verify coating integrity before backfill — preventing cathodic protection failures.
Components
Petrochemical
Petrochemical plants demand rigorous quality control of incoming materials, process equipment, and finished products. Our analyzers ensure material traceability and regulatory compliance throughout your facility.
Incoming Material Verification
Screen raw materials and bulk metals at goods receipt — confirm alloy grade before installation in any process stream.
RoHS & REACH Compliance
Scan components, coatings and polymers for restricted substances (Pb, Cd, Hg, Cr⁶⁺) before export.
Catalyst & Process Chemical Analysis
Quantify heavy metals and key elements in catalysts, by-products, and waste streams in real time.
In-Service Equipment Inspection
Verify alloy integrity of heat exchangers, reactors, and column internals during plant turnarounds.
Per Burn
Metal & Fabrication
Metal fabricators, steel mills, and foundries rely on our XRF and OES instruments for rapid alloy verification, grade sorting, and quality release — eliminating costly mix-ups before parts go into service.
Alloy Verification & Sorting
Sort mixed scrap and verify incoming bar stock, plate, and tube — identify grade and heat number instantly.
OES Melt & Heat Chemistry
Metal Power OES delivers laboratory-quality elemental analysis right on the foundry floor — from melt to release.
Weld Wire & Filler PMI
Verify weld wire, filler metal, and base material match before pressure testing.
Hardness & Surface Testing
PCE portable testers for Brinell, Rockwell, and Vickers hardness on fabricated and heat-treated parts.
Confirmed
Power Generation
Power plants — conventional, gas turbine, nuclear and renewable — demand the highest standards of material integrity. Our instruments support commissioning, in-service inspection, and outage maintenance programmes.
Boiler Tube & Heat Exchanger PMI
Verify alloy grade across tubes, headers, and exchangers at commissioning and during outages — comply with ASME PCC-2.
Turbine Component Verification
Non-destructive analysis of nickel superalloys, titanium and specialty steels — verified on-site without disassembly.
Coal Ash & Fuel Analysis
Portable XRF for ash, biomass, and fuel oil — monitor heavy metals and combustion by-products for compliance.
Renewable Component QC
Verify aluminium and steel for solar PV, wind tower and offshore foundations — ensuring long service life.
Grade
Healthcare & Medical
Medical devices and implants require strict biocompatibility verification. Our XRF analyzers deliver rapid elemental screening of implant alloys and device components, alongside Xograph CR/DR imaging systems for diagnostic facilities.
Implant Alloy Biocompatibility
Screen titanium, cobalt-chrome, and stainless implants for restricted elements — comply with ISO 10993, ASTM F136.
Medical Device RoHS
Verify electronic medical components for restricted substances before CE marking, UKCA and market release.
Xograph CR / DR Imaging
Supply and support for Xograph Healthcare digital radiography systems for hospitals and diagnostic centres.
Pharma Raw Material Screening
Elemental impurity pre-screening of raw materials and excipients to ICH Q3D and USP 232/233 limits.
Detected
Environmental Monitoring
Portable XRF enables rapid on-site environmental screening — from heavy metals in contaminated soil to lead paint in buildings and air particulate analysis — delivering results without lab delays or sample destruction.
Soil & Sediment Heavy Metals
Screen Pb, As, Cd, Cr, Cu, Zn, Hg in-situ — EPA 6200 method and UAE environmental guidelines.
Lead Paint & Hazardous Coatings
Rapid non-destructive screening of painted surfaces in buildings and bridges before demolition.
Waste Classification & WEEE
Classify industrial waste streams and electronic scrap for hazardous content — Basel Convention compliance.
Air Particulate Monitoring
PCE dust monitors for PM2.5, PM10 and TSP across construction and industrial sites.
Detected
Agriculture & Soil Science
Portable XRF delivers rapid in-situ soil analysis for nutrients and heavy metal contaminants — supporting precision agriculture, fertiliser quality control, and crop safety programmes across the UAE and GCC.
Soil Nutrients & Heavy Metals
Measure P, K, Ca, Mg, Fe, Mn, Zn nutrients alongside Cd, Pb, As contamination in-situ — no lab wait.
Fertiliser Quality Control
Screen bulk and bagged fertilisers for heavy metals — especially Cd in phosphate types — before field use.
Irrigation & Crop Tissue
Identify nutrient deficiencies and contamination risks affecting yield and export compliance.
Rapid Field Mapping
XRF geo-mapping for elemental variability — supports precision fertiliser application and crop uniformity.
Grade
Aerospace & Defence
Aerospace components demand zero-tolerance material verification. Our handheld XRF and LIBS analyzers provide rapid, non-destructive alloy identification of titanium alloys, nickel superalloys, and specialty steels across MRO and manufacturing.
Aerospace Alloy ID
Verify Ti-6Al-4V, Inconel, Waspaloy, Al 7075/2024 in incoming, MRO and component repair — no prep.
NADCAP & AS9100 Traceability
Portable XRF delivers rapid conformance verification with full audit-trail documentation.
MRO Incoming Inspection
Identify counterfeit or wrong-grade fasteners, tubes, and structural members before installation.
LIBS for Light Alloys
Apollo LIBS resolves Al, Ti, Mg alloys including 2xxx and 7xxx series that challenge XRF.
Exceedance
Construction & Infrastructure
Construction and demolition projects involving legacy structures require hazardous material screening and structural material verification. Our XRF analyzers deliver fast, non-destructive results on-site across the UAE's major development projects.
Lead Paint & Hazardous Coatings
Rapid non-destructive XRF for older buildings, bridges, and structures before renovation or demolition.
Rebar Verification
Verify carbon, manganese and structural grade of rebar on delivery — before concrete pour.
Aggregate Heavy Metals
Screen recycled aggregate and fill before structural use — meets UAE waste-management guidelines.
Structural Steel PMI
Verify alloy grade of beams, columns, and plates on major Dubai and Abu Dhabi projects.
Limits
Biotech & Pharma
Biotechnology and pharmaceutical manufacturing demand rigorous elemental control — from raw material screening to process equipment verification and elemental impurity testing in finished drug products.
Pharmaceutical Elemental Impurities
XRF pre-screening of raw materials, excipients and packaging per ICH Q3D, USP 232/233 and EU Ph. 2.4.20.
Bioprocess Equipment Verification
PMI of stainless fermenters, bioreactors and process piping — confirm 316L for GMP applications.
Cell Culture Media & Reagents
Trace elemental analysis of media, buffers and reagents — identify contamination affecting yield.
Packaging Compliance
Screen blister foil, closures and container materials for restricted contaminants before batch release.
Material
Analytical R&D
Universities, research institutes, and quality laboratories need reliable, high-throughput elemental analysis. Maark's benchtop XRF, OES, and LIBS instruments deliver laboratory-grade accuracy without the complexity of traditional wet chemistry.
Benchtop XRF for Research
NITON DXL countertop XRF — fixed-geometry, high-throughput analysis for university and R&D labs.
OES for Metallurgical Research
Metal Power OES — rapid multi-element analysis for material science, heat treatment, failure investigation.
LIBS for Light Elements
Apollo LIBS for C, Li, Be — applications in battery research, geology, and advanced materials.
Reference Material Validation
Verify CRMs and standard samples — supports accreditation, interlab comparisons and method validation.
Fine Gold
Precious Metals & Banking
Trading houses, refineries, jewellers and financial institutions across Dubai and the GCC rely on Maark's gold-testing XRF for non-destructive purity verification — including detection of tungsten substitution and karat-grade resolution in seconds.
Gold & Silver Purity
Verify fineness of bullion bars, coins, and scrap to LBMA and DMCC standards — non-destructive, seconds per scan.
Karat & Jewellery Grading
Resolve 24K / 22K / 18K / 14K / 10K alloys — supports retail counters, pawn brokers and refining houses.
Counterfeit Detection
Detect tungsten substitution and platings using analyser depth modes — protect bullion and bank reserves.
Refinery Process Control
Quantify Pt, Pd, Rh and PGM scrap during refining — instant elemental balance on every charge.
The Right Instrument
For Every Industry
With over 20 years in the UAE market and authorised partnerships with Thermo Scientific, Metal Power, and leading NDT manufacturers, Maark Scientific delivers industry-specific analytical solutions backed by local expertise, certified service, and full application support across Dubai and the GCC.
Talk to Our Specialist